Wind Power Plant

Product Features

  • Wind Turbine Characteristics
  • Stand-Alone Renewable Energy Systems
  • doubly-fed induction generator system
  • Micro Grid-Connected WTG System
  • Active and Reactive Power Control
  • Multifunctional Energy Measurement
  • Developed Interoperable SCADA System
  • Software for System Simulation and Design

Training Contents

  • Investigation and operation of small wind power stations

  • Design and initial operation of a small wind power generator

  • Operation with fluctuation wind force in off-line operation

  • Design of an off-grid system for the generation of AC voltage

  • Wind power generator in grid-connected operation

  • Software simulation and design

Specifications

Wind Turbine Simulator

  • Permanent Magnet Synchronous Generator (PMSG) : 1 hp
  • Induction Motor : 1 hp
  • Inverter Motor Drive Power Rating : 1 kVA

Stand-Alone Renewable Energy Systems

  • Wind Turbine Generator Power Rating : 100 W
  • Battery Charger Power Rating : 100 W
  • Battery Voltage : 12 V
  • Battery Capacity : 12 Ah
  • Inverter Off Grid : 1 Phase
  • Power Rating : 100 W

Power meter 3 Phase

  • 3 Phase 4 Wire System
  • Display Type Backlit LCD
  • Class 1  reactive energy conforming to IEC 62053-24
  • Class 0.5S active energy conforming to IEC 62053-22
  • Class 5 harmonic distortion (I THD & U THD)
  • Total harmonic distortion up to the 31st harmonic
  • measurement current 5 – 6000 mA
  • (Phase to Phase ) measurement voltage 35 – 480 V AC 50/60 Hz
  • (Phase to Neutral) measurement voltage 20 – 277 V AC 50/60 Hz
  • Energy Measurement Displayed Vrms, Irms, P, Q, S, PF, f, THDv, THDi
  • Communication Port Protocol Modbus RTU 4800/ 9600/ 19200 Bps, 38.4 Kbps Even/Odd Or None – 2 Wires, Insulation 2500 V
  • Communication Service Remote Monitoring

Inverter Three - Phase

  • Maximum input power :  5.5 kW
  • Nominal voltage : 370 Vdc
  • Operating voltage : 100 Vdc – 550 Vdc
  • Startup voltage : >125 Vdc
  • Startup power : 30 Watt
  • Absolute maximum voltage : 600 Vdc
  • Full power range : 220 Vdc – 450 Vdc
  • Number of inputs : 2 pairs MC4
  • Rated current :  12 Adc x 2
  • Maximum short circuit current per MPPT (Isc): 15A / 15A
  • Power factor output adjustable : 0.80 leading – 0.80 lagging

SCADA System

  • SCADA remote operation

Inverter Single - phase

  • Inverter 1-Phase Off – grid : Pure Sine wave 300 Watt

System Supported

  • Dimension : D 800 x W 1500 x H 750 mm.
  • Main Power Inlet 1 phase with electric wire : 3 m.
  • Main Power Inlet 3 phase 
  • Circuit Breake  : 1 phase
  • Earth Leakage Circuit Breaker
  • Pilot Lamp  : 1 unit
  • Emergency stop : 1 unit
  • Dual Outlets Plug: 220 Volt 2 unit
  • Table surface melamine-coated plywood and covered with PVC edges

Wind Turbine Generator

  • Helix Wind Turbine
  • DFIG Converter

  • System Design
  • Simulation Results

  • Real-time monitoring, management and control

Custom Product Requirements